Jump to a section
Air Conditioning/Heating
HVAC Technology Level 1
Study HVAC operations, maintenance, and troubleshooting of residential and light commercial heating/cooling systems. Use diagnostic tools/procedures to identify problems and establish operating efficiency in accordance with manufacturer guidelines and standards. ALL students first get 72.5 hours of Core Curriculum. Books provided for in-classroom use only.
NCCER Level 1 Certificate earned at end of course. Book required and available at bookstore. Core Curriculum Fifth Edition. ISBN 978-0-13-413098-9. HVAC Level 1. Revised 2018. ISBN 978-0-13-518509-4. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
Cost is tuition, supply and insurance fee. Financial Assistance is available by contacting us at (252)638-7248.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
SOLD OUT* | Aug 23-Dec 14, 2021 Sa classes 8/28, 9/25, 10/23, 11/20 No class 9/6, 11/24 | MTW Sa | 5:30-9PM 8AM-4:30PM | VOLT Center | $255 |
*Register for Waitlist by selecting the Register Now button below |

HVAC Technology Level 2
Study HVAC operations, maintenance, and troubleshooting of residential and light commercial heating/cooling systems. Key content includes: Commercial Airside Systems, Chimneys, Vents, and Flues, Introduction to Hydronic Systems, Air Quality Equipment, Leak Detection, Evacuation, Recovery, and Charging, Alternating Current, Basic Electronics, Introduction to Control Circuit Troubleshooting, Troubleshooting Gas Heating, Troubleshooting Cooling, Heat Pumps, Basic Installation and Maintenance Practices, Sheet Metal Duct Systems, and Fiberglass and Flexible Duct Systems. ALL students must have successfully completed NCCER Level 1 training. Books provided for in-classroom use only.
NCCER Level 2 Certificate earned at end of course. Book required and available at bookstore. HVAC Level 2. Revised 2018. ISBN 978-0-13-518512-4. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
Cost is tuition, supply and insurance fee. Financial Assistance is available by contacting us at (252) 638-7248.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
62296 | May 10-Aug 12, 2021 No class 5/31, 7/5 | MTW Th | 2-5PM 1-5PM | Volt Center | $255 |
62310 | May 17-Aug 5, 2021 No class 5/31, 7/5 | M-Th | 8AM-12PM | Volt Center | $255 |

HVAC Technology Level 3
Study HVAC operations, maintenance, and troubleshooting of residential and light commercial heating/cooling systems. Key content includes: Fasteners, Hardware, and Wiring Terminations, Control Circuit and Motor Troubleshooting Cooling, Troubleshooting Heat Pumps, Troubleshooting Gas and Oil Heating, Troubleshooting Accessories, Zoning, Ductless, and Variable Refrigerant Flow Systems, Commercial Hydronic Systems, Steam Systems, Retail Refrigeration System, Customer Relations. ALL students must have successfully completed NCCER Level 1 and 2 training. This class is only offered annually and expected to fill up quickly.
NCCER Level 3 Certificate earned at end of course. Book required and available at bookstore. HVAC Level 3. Revised 2018. ISBN 978-0-13-518510-0. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
Cost is tuition, supply and insurance fee. Financial Assistance is available by contacting us at (252) 638-7248.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
60882 | May 17-Aug 17, 2021 Sa classes 6/5, 6/26, 8/7 No class 5/31, 7/5 | MTW Sa | 5:30-8:30PM 8AM-4PM | VOLT Center | $255 |
AHR-HVACLVL3 | Aug 16-Nov 3, 2021 No class 9/6 | M-Th | 8AM-12PM | VOLT Center | $255 |

CFC/EPA Certification
Trade jobs abound. Earn the certifications that allows you to purchase coolants for small appliances and refrigerant/cooling systems. The instructor will lead discussions and presentations of certification materials, including a pre-test. The state examination or on-line ESCO test is administered during class.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
60893 | May 18-19, 2021 May 20, 2021 | TW Th | 5:30-8:30PM 5:30-9:30PM | VOLT Center | $99 |
61026 | Oct 23, 2021 Oct 24, 2021 | Sa Su | 8AM-3PM 8AM-12PM | VOLT Center | $99 |

Construction
NCCER Construction I
This 305-hour program provides the student with the knowledge and skills in the construction trades that the industry is looking for. You will receive certification for Level 1 Construction, the Core and Drywall through NCCER (National Center for Construction Education and Research), which is nationally recognized. Questions? Contact Eddie Foster (see below).
NCCER Level 1 Certificate earned at end of course. Book required and available at bookstore. Core Curriculum Fifth Edition. ISBN 978-0-13-413098-9. Carpentry Level 1. Revised 2013, Fifth Edition/ ISBN 978-0-13-413098-9. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |

NCCER Carpentry II
After successfully completing NCCER Construction 1, you’re ready for NCCER Construction 2. In Part 2, you’ll be introduced to carpentry and weatherization. You’ll add valuable skills and knowledge to your job-related tool box, including knowledge of building materials, construction drawings, floor systems, wall systems, basic stair layout and ceiling joist and roof framing. You will also learn the fundamentals of weatherization and how it applies to the building envelope. You’ll start to apply what has been learned in the classroom to the real world through hands-on collaborative construction of the homes being built for The Greater New Bern Habitat for Humanity and various other projects.
When you successfully complete the program, you will receive NCCER certifications in Level 2 Construction and the Fundamentals of Weatherization. Book required and available at bookstore. Carpentry Framing & Finishing Level 2. Revised 2013, Fifth Edition. ISBN 978-0-13-340430-2. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
This course will be offered on the New Bern campus and at the Religious Community Services (RCS) Annex at 919 George Street. Cost is $180.60 (tuition and insurance fee). For class schedule, financial assistance, or other information, contact Eddie Foster.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |

NCCER Construction Level 1 & 2
This 435-hour program provides the student with the knowledge and skills in the construction trades that the industry is looking for.
Part One provides training in: Building Materials and Fasteners, Hand and Power Tools, Construction Drawings, Floor Systems, Wall Systems, Ceiling Joist and Roof Framing and Basic Stair Layout.
Part Two provides training in: Commercial Drawings, Steel Framing, Exterior Finishing, Thermal and Moisture Protection, Roofing Applications, Door and Hardware, Drywall Installation, Drywall Finishing, Window, Door, Floor and Ceiling Trim.
You will receive certification for Level 1 Carpentry and Level 2 Carpentry Framing and Finishing and the Core all through NCCER (National Center for Construction Education and Research) which is nationally recognized. Textbook provided.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
CAR-NCCER-1-61946 | Jul 6-Oct 25, 2021 No class Sep 6 | MTWTh | 8AM-3:30PM | VOLT Center | $329.40 |
CAR-NCCER-2-62091 | Jul 6-Dec 16, 2021 | TWTh SSu | 5:30-8:30PM 8AM-4:30PM | VOLT Center | $329.40 |

Contact Information
Eddie Foster, Executive Director of Environmental Safety and Corporate Training
Volt Center, Room 107
205 First Street, New Bern, NC 28562
(252) 638-3919
Email
Back to Top
Code Enforcement
Code Enforcement – Law and Administration
Study the NC Administrative and Enforcement Requirements Code available from the International Code Council at (800) 786-445 or www.iccsafe.org and qualify to sit for any of the State Code Enforcement examinations. Required textbook: 2018 edition of “North Carolina Administrative Code and Policies” is MANDATORY and electronic versions are not acceptable. Books available at OSFM in Raleigh.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
60596 | May 7, 2021 May 8, 2021 May 9, 2021 | F Sa Su | 7-10PM 8AM-5PM 8AM-12PM | HV STEM 127/129 | $70 |
60597 | Sep 24, 2021 Sep 25, 2021 Sep 26, 2021 | F Sa Su | 7-10PM 8AM-5PM 8AM-12PM | HV STEM 127/129 | $70 |
Contact Information
Jeff Schulze, Director of Trade Programs
Volt Center, Room 103
205 First Street, New Bern, NC 28562
(252) 638-5467
Email
Electrical
NCCER Electrical Level 1
185 Hours (Included mandatory NCCER Core Curriculum 72.5 hours). If you have Core Certificate, you begin class after Core Curriculum section. Modules include: Orientation to the Electrical Trade (2.5 hours), Electrical Safety (10 hours), Introduction to Electrical Circuits (7.5 hours), Electrical Theory (7.5 hours), Introduction to National Electrical Code (NEC) (7.5 hours), Device Boxes (10 hours), Hand Bending (10 hours), Raceways and Fittings (20 hours), Conductors and Cables (10 hours), Basic Electrical Construction Drawings (7.5 hours), Residential Electrical Services (15 hours), Electrical Test Equipment (5 hours).
NCCER Level 1 Certificate earned at end of course. Book required and available at bookstore. Core Curriculum Fifth Edition. ISBN 978-0-13-413098-9. Electrical Level 1. Revised 2020, Tenth Edition. ISBN 978-0-13-690853-1. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
61045 | May 10-Aug 12, 2021 No class 5/31, 7/5 | M-Th | 2-5:30PM | VOLT Center | $255 |
60903 | Jul 12-Oct 4, 2021 No class 9/6 | M-Th | 8AM-12PM | VOLT Center | $255 |

NCCER Electrical Level 2
145 Hours (with revision 2017 NEC). Core Curriculum required. Modules include: Alternating Current (17.5 hours), Motors: Theory and Application (20 hours), Electric Lighting (15 hours), Conduit Bending (15 hours), Pull and Junction Boxes (12.5 hours), Conductor Installations (10 hours), Cable Tray (7.5 hours), Conductor Terminations and Splices (7.5 hours), Grounding and Bonding (15 hours), Circuit Breakers and Fuses (12.5 hours). ALL students must have successfully completed NCCER Level 1 training. Books provided for in-classroom use only.
NCCER Level 2 Certificate earned at end of course. Book required and available at bookstore. Electrical Level 2. Revised 2020, Tenth Edition. ISBN 978-0-13-689782-8. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
WAITLIST | May 17-Aug 24, 2021 No class 5/31, 7/5 | MTW | 5:30-9PM | VOLT Center | $255 |
62141 | May 17-Aug 5, 2021 No class 5/31, 7/5 | MTWTh | 5:30-9PM | VOLT Center | $255 |
ELC-ELCLVL2 | Aug 16-Oct 21, 2021 No class 9/6 | MTWTh | 8AM-12PM | VOLT Center | $255 |
ELC-ELCLVL2 | Aug 23-Nov 23, 2021 No class 9/6, 11/11 | MTWTh | 2-5PM | VOLT Center | $255 |

NCCER Electrical Level 3
155 hours (with revision 2017 NEC). Core Curriculum required. Modules include: Load Calculations – Brand and Feeder Circuits (17.5 hours), Conductor Selection and Calculations (15 hours), Practical Applications of Lighting (12.5 hours), Hazardous Locations (15 hours), Overcurrent Protection (25 hours), Distribution Equipment (12.5 hours), Transformers (12.5 hours), Commercial Electrical Services (10 hours), Motor Calculations (12.5 hours), Voice, Data, and Video (10 hours), Motor Controls (12 hours). ALL students must have successfully completed NCCER Level 1 training. Books provided for in-classroom use only.
NCCER Level 3 Certificate earned at end of course. Book required and available at bookstore. Electrical Level 3. Revised 2020, Tenth Edition. ISBN 978-0-13-690480-9. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
ELC-ELCLVL3 | Aug 30-Dec 14, 2021 No class 9/6, 11/11, 11/24 | TWTh | 5:30-9PM | VOLT Center | $255 |

Contact Information
Jeff Schulze, Director of Trade Programs
Volt Center, Room 103
205 First Street, New Bern, NC 28562
(252) 638-5467
Email
Back to Top
Masonry
Masonry Level 1
195 Hours (included is mandatory NCCER Core Curriculum, which is a prerequisite for Level 1 completion). If you have Core Curriculum Certificate, you begin class after Core Curriculum section. Modules include: Introduction to Masonry (12.5 hours), Masonry Safety (15 hours), Masonry Tools & Equipment (15 hours), Measurements, Drawings, and Specifications (10 hours), Mortar (10 hours), and Masonry Units and Installation Techniques (60 hours)
NCCER Level 1 Certificate earned at end of course. Book required and available at bookstore. Revised 2015, Core Curriculum Fifth Edition. ISBN 978-0-13-413098-9. Revised 2013, Masonry Fourth Edition. ISBN 978-0-13-413098-9. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
61999 | Aug 16-Dec 8, 2021 No class 9/6, 11/23 | MTW | 5:30-9:30PM | VOLT Center | $255 |

Masonry Level 2
Minimum 152.5 Hours (Masonry Level 1 certificate is a prerequisite for Level 2 completion). Modules include: Residential Plans and Drawing Interpretation (12.5 hours), Residential Masonry (25 hours), Reinforced Masonry (20 hours), Masonry Openings and Metalwork (20 hours), Advanced Laying Techniques (40 hours), Effects of Climate and Masonry (20 hours), and Construction Inspection and Quality Control (15 hours).
NCCER Level 2 Certificate earned at end of course. Book required and available at bookstore. Revised 2014, Masonry Fourth Edition. ISBN 978-0-13-377970-7. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
61967 | May 24-Aug 2, 2021 No class 5/31, 7/5 | MTWF | 5:30-9:30PM | VOLT Center | $255 |

Contact Information
Jeff Schulze, Director of Trade Programs
Volt Center, Room 103
205 First Street, New Bern, NC 28562
(252) 638-5467
Email
Plumbing
NCCER Plumbing Level 1
Study what is needed to land a demanding and rewarding career in the Plumbing Industry. After completing this course students will be competent in: Introduction to the Plumbing Profession, Plumbing Safety, Tools of the Plumbing Trade, Introduction to Plumbing Math, Introduction to Plumbing Drawings, Plastic Pipe and Fittings, Copper Pipe and Fittings, Cast-Iron Pipe and Fittings, Carbon Steel Pipe and Fittings, Introduction to Plumbing Fixtures, Introduction to Drain, Waste, and Vent (DWV) Systems, and Introduction to Water Distribution Systems. ALL students first get 72.5 hours of Core Curriculum. Books are provided for in-classroom use only.
NCCER Level 1 Certificate earned at end of course. Book required and available at bookstore. Core Curriculum Fifth Edition. ISBN 978-0-13-413098-9. Plumbing Level 1. Revised 2020, Fourth Edition. ISBN 978-0-13-663791-2. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
Cost is tuition, supply and insurance fee. Financial Assistance is available by contacting us at (252) 638-7248.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
PLU-NCCER1 | May 17-Aug 12, 2021 5/22, 6/5, 6/19, 7/10 7/24, 8/7 No class 5/31, 7/5 | M-Th Sa Sa | 6-9:30PM 8AM-4:30PM 8AM-4:30PM | VOLT Center | $255 |
PLU-NCCER1 | Jan 10-May 5, 2022 No class 1/17, 4/5 | M-Th | 6-9:30PM | VOLT Center | $255 |

NCCER Plumbing Level 2
Continue your training in the demanding and rewarding career in the Plumbing Industry. After completing this course students will be competent in: Plumbing Math Two, Reading Commercial Drawings, Structural Penetrations, Insulation, and Fire Stopping, Installing and Testing DWV Piping, Installing Roof, Floor, and Area Drains, Installing and Testing Water Supply Piping, Types of Valves, Installing Fixtures and Valves, Installing Water Heaters, Basic Electricity, and Fuel Gas and Fuel Oil Systems. Books are provided for in-classroom use only.
NCCER Level 2 Certificate earned at end of course. Book required and available at bookstore. Plumbing Level 2. Revised 2013, Fourth Edition. ISBN 978-0-13-314850-3. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
Cost is tuition, supply and insurance fee. Financial Assistance is available by contacting us at (252) 638-7248.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
PLU-NCCER2 | Aug 30-Dec 2, 2021 Sa class: 9/18, 10/2, 10/23 11/6, 11/20 No class 9/6, 11/11, 11/24, 11/25 | M-Th Sa | 6-9PM 8AM-4PM | VOLT Center | $255 |
PLU-NCCER2 | May 16-Aug 13, 2022 Sa class: 5/21, 6/11, 7/9, 7/30, 8/13 No class 5/30, 7/4 | M-Th Sa | 6-9PM 8AM-4PM | VOLT Center | $255 |

NCCER Plumbing Level 3
Continue your training in the demanding and rewarding career in the Plumbing Industry. After completing this course students will be competent in: Applied Math, Sizing Water Supply Piping, Potable Water Treatment, Backflow Preventers, Types of Venting, Sizing DWV and Storm Systems, Sewage Pumps and Sump Pumps, Corrosive-Resistant Waste Piping, and Compressed Air.
NCCER Level 3 Certificate earned at end of course. Book required and available at bookstore. Plumbing Level 3. Revised 2014, Fourth Edition. ISBN 978-0-13-340424-1. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
Cost is tuition, supply and insurance fee. Financial Assistance is available by contacting us at (252) 638-7248.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
PLU-NCCER3 | Aug 29-Dec 8, 2022 No class 9/5, 11/23, 11/24 | M-Th | 6-9PM | VOLT Center | $255 |

Contact Information
Jeff Schulze, Director of Trade Programs
Volt Center, Room 103
205 First Street, New Bern, NC 28562
(252) 638-5467
Email
Small Business Startup Classes (Contractor & Entrepreneur Classes)
Were you affected by Hurricane Florence and discovered that there was a shortage of skilled trades persons in the area. Do you have specific trades skills and would like to start your own business? Do you need information on how to go about getting started? If you answered yes to any of these questions then Craven Community College has the solution to meet your needs.
Craven Community College in conjunction with a grant awarded by the American Red Cross has developed a 32-hour training program on “ How To Start a Small Business “. This training program provides training on the following topics; Goal Setting; Business Planning, Community Analysis and Marketing, Breakeven Analysis; Cash Flow Projections; Target Marketing; Bookkeeping; Operations; Creating the Business Plan and Taxes.
To accommodate the busy schedules of everyone needing this training Craven CC is offering a day class and an evening class. For those individuals who were affected by Hurricane Florence the registration cost for these classes are covered by the Red Cross Grant.
Please contact Antoinette Williams at 252-638-0857 or by email for more information.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |

Contact Information
Eddie Foster, Executive Director of Environmental Safety and Corporate Training
Volt Center, Room 107
205 First Street, New Bern, NC 28562
(252) 638-3919
Email
Back to Top
Welding
Welding Certification NCCER
Upon completion of this course, you will be a Nationally Certified level 1 Welder. You will learn general safety, common hazards, oxy fuel, plasma arc, air carbon arc, base metals, joint design, quality workmanship, codes, SMAW, electrodes. College will provide all resources including textbooks.
National Certification website
According to US Department of Labor a career as a Welder has a median annual wage of $36,300 and a 6% growth in employment is expected, which will provide skilled applicants with good job opportunities.
Tuition
- Cash, Check, Credit Card or Debit Card
- Third Party Sponsorship-Scholarship
- Student Loan
- Veteran Affairs Benefits
Welding Level 1 NCCER Certification
NCCER Level 1 Certificate earned at end of course. Book required and available at bookstore. Core Curriculum Fifth Edition. ISBN 978-0-13-413098-9. Welding Level 1. Revised 2015, Fifth Edition. ISBN 978-0-13-416311-6. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION | FEE |
---|---|---|---|---|---|
62137 | Aug 16-Dec 16, 2021 No class 9/4-6, 10/9-11, 11/11, 11/23-27 | MTTh Sa | 5:30-10PM 8AM-5PM (1hr lunch break) | Havelock - IAT 105 | $375 |
Welding Level 2 NCCER Certification
The L2 NCCER Welding course provides instruction on the principles and practices of welding. Emphasis is on Welding Symbols, Reading Welding Detail Drawings, Physical Characteristic and Mechanical Properties of Metals, Preheating and Post heating of Metals, GMAW (MIG) and FCAW ( Flux Core ARC Welding) and GTAW (TIG) set up and uses of different filler metals and gasses. The NCCER level 2 class can be taken prior to the NCCER Level 1 Class. Students completing the class must pass written exams with a 70% or higher and complete all performance evaluations.
Book required and available at bookstore. Welding Level 2. Revised 2015, Fifth Edition. ISBN 978-0-13-416310-9. Call bookstore for availability at 252-638-7259 or craven@bkstr.com.
COURSE ID | START/END DATE | DAY | TIME | LOCATION* | FEE |
---|---|---|---|---|---|
62106 | Apr 26-Jun 10, 2021 | MTWTh | 8AM-5:30PM | Havelock - IAT 105 | $375 |
62127 | May 24-Aug 14, 2021 No class 5/24, 5/31, 7/3, 7/5 | MTTh Sa | 5:30-10PM 8AM-5PM | Havelock - IAT 105 With Online Portion | $375 |
60826 | Jul 1-Oct 12, 2021 No class 7/5, 9/6 | MTWTh | 5-9PM | VOLT Center | $375 |
Contact Information
Megan Johnson, Workforce Development Coordinator (Havelock Programs)
(252) 444-6014
Email
Eddie Foster, Executive Director of Environmental Safety and Corporate Training
Volt Center, Room 107
205 First Street, New Bern, NC 28562
(252) 638-3919
Email
NCCER Welding Level 1 & 2
This 585-hour program provides the student with basic skills needed to obtain entry level employment with a company as a qualified welder.
Part One consists of training in: Welding Safety, Oxy fuel cutting, Plasma Arc Cutting, Air Carbon Arc Cutting, Metal Preparation, weld Quality SMAW Groove welds with Backing and Open Root Grove Welds.
Part Two consists of training in: Welding Symbols, Reading welding Detail Drawings, GMAW -Plate Welding and FCAW – Plate Welding.
This course provides nationally recognized credentialing through the National Center for Construction Education and Research (NCCER).
COURSE ID | START/END DATE | DAY | TIME | LOCATION* | FEE |
---|---|---|---|---|---|
62115 | Jun 21-Nov 2, 2021 | MTWTh | 8AM-5PM | Havelock - IAT 105 | $569.60 |
61926 | Jul 1-Dec 2, 2021 No class 7/5, 9/6, 11/11, 11/24, 11/25 | MTWTh | 8AM-3:30PM | VOLT | $569.60 |

Contact Information
Eddie Foster, Executive Director of Environmental Safety and Corporate Training
Volt Center, Room 107
205 First Street, New Bern, NC 28562
(252) 638-3919
Email
Back to Top